The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
TMUX1104: Can this 1:4 Mux be used for analog signals (ADC signal)?
Yes, the mux will act as effectively a resistor with some loading capacitance. So it will work as long as you keep the voltage within the recommended operating range; which is between 0V up to your supply voltage which can be up to 5.5V.
