Power down sequence of SN74LVCC3245A

ttd

Mastermind 7950 points

Other Parts Discussed in Thread: SN74LVCC3245A

Dear Technical Support Team,

I have a question about power down sequence of SN74LVCC3245A.

Datasheet describes Power-Up Considerations, but I can't find a power down sequence.

Does this device need a power down sequence?

http://www.tij.co.jp/jp/lit/ds/symlink/sn74lvcc3245a.pdf

Best Regards,

y.i

over 9 years ago

0 Adam Torma over 9 years ago

TI__Mastermind 45380 points

I have brought this question to the attention of the applications team responsible for this device and they should be getting back to you soon.

Thank you,

Adam

0 Emrys Maier over 9 years ago

TI__Guru* 96712 points

Hi y.i,
The power-up sequence of this part is there to avoid output glitches while the system powers up. If you need the same assurance during power-down, reverse the power-up sequence. Otherwise, it should not be a concern.

Switches & multiplexers

Switches & multiplexers forum

Power down sequence of SN74LVCC3245A