TS5A26542: operation at Vio=+5V.

Gil Rafalovich

Prodigy 20 points

Part Number: TS5A26542

Hello

can the switch I\O operate at Vio=+5V , IN1,IN2 = Vio levels (0 & +5 V)

consider the max Vio should be less than 6.5V ,it shouldn't be a problem .

i would like to validate that

thanks

Gil Rafalovich

over 7 years ago

0 Adam Torma over 7 years ago

TI__Mastermind 45410 points

Gil,

The recommended operating voltage for the I/O pins and digital logic pins are bounded by the supply voltage.

Thank you for catching this error in our datasheet we will put it into our change management system to be corrected. What are you going to do with the TS5A26542 in your system?

Thank you,

Adam

0 Gil Rafalovich over 7 years ago in reply to Adam Torma

Prodigy 20 points

Hi

Thanks For the clarification

we are going to use it as relay on IC test Load Board

Gil

0 Adam Torma over 7 years ago in reply to Gil Rafalovich

TI__Mastermind 45410 points

Gil,

You are welcome. Good luck with your design and let us know if you have more questions.

Adam

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Switches & multiplexers

Switches & multiplexers forum

TS5A26542: operation at Vio=+5V.