• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 928 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CD4097B: What is the input logic level

Vincent Chen64988
Expert 4480 points
Part Number: CD4097B

Hi Team,

My customer is using CD4097B and supply voltage is 3.3V(VSS is connected to GND). The control level is described at 5V and what is the input logic level when supplied voltage is 3.3V?

Thanks a lot.

Vincent Chen

  • 0
    TI__Intellectual 2900 points
    Hi Vincent,


    As you suggested, VIH and VIL of CD4097B are not specified at Vc = 3.3V. I would assume the following analysis.


    The VIL and VIH of CD4097B are proportional to its supply voltage. You can tell from the table below.

    VIL (max) = 1.5V, VIH (min) = 3.5V when Vc = 5V
    VIL (max) = 3.0V, VIH (min) = 7.0V when Vc = 10V
    VIL (max) = 4.0V, VIH (min) = 11 V when Vc = 15V

    Therefore, for Vc = 3.3 V case, the VIL(max) = 1.0V and VIH(min) = 2.3V. Please let me know if you disagree.
  • 0 in reply to Fan.Wang
    TI__Expert 4480 points
    Hi Fan,

    Got it, and thank you very much for your prompt response.

    Best Regards,
    Vincent Chen