TS12A12511: TS12A12511DCNR Device Marking

Roland Melad

Part Number: TS12A12511

Hi,

Is NFHA an acceptable marking for TS12A12511DCNR? The datasheet and website show markings as HFHA and NFHS. Our customer have purchased parts from Digi-Key and the marking is "NFHA" which is not the same.

Regards,

Roland

over 5 years ago

0 Adam Torma over 5 years ago

TI__Mastermind 45400 points

Roland,

Do you have a picture of the topside marking you can share? We would also need the shipping label picture and order number so we can trace the lot.

Thank you,
Adam

0 Roland Melad over 5 years ago in reply to Adam Torma

TI__Intellectual 1185 points

Hi, here is the info they have shared.

0 Adam Torma over 5 years ago in reply to Roland Melad

TI__Mastermind 45400 points

Roland,

Thank you for providing these pictures I think they will be helpful. I sent these images over to our quality engineer to track down the lots. I expect a response before the end of the week.

Thank you,

Adam

0 Adam Torma over 5 years ago in reply to Adam Torma

TI__Mastermind 45400 points

Roland,

Wow, the pictures really helped with a quick response from the quality team.

"Thank you for bringing it to our attention, NFHA is a valid marking, and does not introduce a quality issue. Material marked with “NFHA” is valid TI material, and TI’s Terms of Sale for Semiconductor Products, including applicable warranties, apply equally to material marked with “NFHA” and “NFHS”."

Thank you,
Adam

0 Roland Melad over 5 years ago in reply to Adam Torma

TI__Intellectual 1185 points

Thank you very much Adam for your help

Switches & multiplexers

Switches & multiplexers forum

TS12A12511: TS12A12511DCNR Device Marking