This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMUX1204: multi-tone muxing for gas flowmeter

Part Number: TMUX1204
Other Parts Discussed in Thread: TMUX1104


Could you please advise,

can TMUX1204 be used for muxing an analog signal in gas flowmeter.

The analog signal which intended to be muxed is an alternate current with different frequencies.

Is this device recommended to be used in flowmeters in generall or could youo please recommend another one?

  • Hello Slava,

    All our devices can be used in any industrial application. If this device is suitable for your application depends on the signal bandwidth and signal strength. As long as all parameters are within the recommended operating conditions, you can use this part. \

    Should you need higher precision, we recommend the TMUX1104, a pin to pin part with better performance.

    Best regards,