• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 195 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TS5A3159A: cross talk isolation

Patrick Chen(TPE System & Application)
Expert 3430 points
Part Number: TS5A3159A

Hi Sir,

My customer is using TS5A3159AYZPR on their system and facing a cross talk issue.

Could you help to advise if we have a P2P solution with higher cross talk isolation spec?

The signal is a video data and data rate as below. 

HD-TVI(30MHz)

CVBS(PAL 50MHz)

Many thanks,

Patrick 

  • 0
    TI__Expert 5660 points

    Hi Patrick,

    Could you explain more about the crosstalk issue you are experiencing? Under which conditions do you observe this issue?

    Can you share a schematic and scope shot of the noticeable crosstalk?

    We have a few pin compatible devices with similar crosstalk specifications, so I would like to troubleshoot this issue further.

    Thanks,
    Kate

  • 0 in reply to Kate Dickson
    TI__Expert 5660 points

    Hi Patrick,

    Since I have not heard from you, I will close this thread. Please do not hesitate to reach out with any additional information or questions!

    Best regards,
    Kate