If I operate this IC at 5V , and at 0 Vdd what will be powered of protection voltage ?Will it be 3.6V as per datasheet or 5V?
Actually ,our applications is to sense 0-5 V so there is possibility of 5 V coming to signal pin of MUX , so need clarification . Is Hi Z is enough for that ?
if MUX is operating at 5V and in off condition 5V comes on signal path will it be ok or damage the IC ?
for more clarification pls see attached image , we are shorting 100 k ( i.e, connecting DE_AIN_A_V_P and DE_AIN_A_V_Z_P ) with help of MUX ., but if MUX is operating at 5V and in off condition 5V comes on signal i.e, at 560R path will it be ok or damage the IC ? another thing is i have also tested TI's TS3A4751PWRG4 and this IC satisfies our application but the only thing is it is 3.3V operated IC . Kindly reply with your valuable suggestions
Awaiting for your fast reply. (TI Case no : CS0265817)
Thanks & regards