TS3A5018: using TS3A5018 for PCI-e GEN 5 switching

Hi Itzik,

From a bandwidth perspective this will work for this device as it supports up to 300MHz, however, what is the voltage of the signal you are passing? This device supports up to 3.3V. Also, do you need a 4 channel, 2:1 switch (like the one you suggested, TS3A5018)? Or do you just need a single channel, 2:1 switch?

Thanks!

Bryan

hello Bryan , 

hello Bryan ,   

     I would like to mux PCI-e Gen 5 clock which is a differential clock and the voltage is 0 - 0.7V