This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: CD74HC4051
My customer is using CD74HC4051M96 in one of their projects and want to know the worst case leakage current for each channel IN/OUT(A0-A7) when Switch is off.
Here are my questions after reading the datasheet.
1, when Enable device using Enable pin while switch is OFF for some channels, what’s the difference between 1,2,4 channel, and 4051? Pls view the capture picture as below. Customer wants to know the worst case leakage current for each channel in such condition.
2, when using the Enable pin(pin 6 of 4051) to disable the device, They want to know the leakage current for each channel in worst case.
The SCHS122L datasheet applies to several different parts. The table you highlighted below contains leakage information for the 4051 (8-channel device) as well as the 4052 (4-channel device) and 4053 (2-channel device).
To find the worst case leakage for the SN74HC4051 8-channel device you need to look at the highlighted section below. The highlighted section contains two leakage measurements under two different test conditions varying VEE and VCC. The SN74HC4051 max leakage current will be under the test condition with VEE = -5 V and VCC = 5 V because this test places a larger voltage difference on the common input pin which causes more current to leak through the part.
The leakage current also varies with temperature. The worst case leakage will occur at the max temperature 125 deg C.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.