This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TS5A22366: TS5A22366 / NC pin ties to GND

Guru 21555 points

Replies: 3

Views: 436

Part Number: TS5A22366

Hi,

I understand that NC pin has no internal connection, so it can be tied to GND. Is my understanding correct?

Best Regards,

Satoshi / Japan Disty

  • Satoshi-san,

    Signal switches terminals have the abbreviations NC, NO, and COM.  The abbreviations identify the type of terminal on the signal path 

    NC = Normally Closed

    NO= Normally Open

    COM = Common

    The letters "NC" for signal switches reference Normally Closed instead of "Not Connect".  You may tie the Normally Closed signal path to ground if you would like to use the 2:1 switch in a 1:1 configuration.

    Thank you,

    Adam

  • In reply to Adam Torma:

    Hi Adam,

    Thank you for your response. But now I'm asking about A2 pin (N.C.). Can we connect A2 pin to GND? I apologize for confusing you.

    Best Regards,

    Satoshi

  • In reply to S.Satoshi:

    Satoshi-san,

    I'm sorry I miss understood your question.  Yes, you may connect A2 to ground or leave it floating because it is not internally connected. 

    Thank you,

    Adam

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.