TS3V330: I2S signals 1:2 mux/demux

Gim Song

Intellectual 1110 points

Part Number: TS3V330
Other Parts Discussed in Thread: TS5MP645

Hi,

We have TS3V330 that can be used for I2S signal 1:2 mux/demux.

Do we have 8bits part 1:2 mux/demux that support I2S signals? I saw SN74CBTL1692 where max BW is 200MHz.

Please advise.

Thanks.

Best regards,

Gim Song

over 6 years ago

0 Adam Torma over 6 years ago

TI__Mastermind 45340 points

Gim,

I used the ti.com switch search tool and filtered on 2:1 switches with at least 8 channels and found the TS5MP645 device. What do you think about this selection?

What is the voltage level and bandwidth of the I2S signals you would like to pass through the switch?

Thank you,

Adam

0 Gim Song over 6 years ago in reply to Adam Torma

TI__Intellectual 1110 points

Hi Adam,

Thanks for the suggestion. TS5MP645 gives a smaller solution :)
I2S signals voltage level is 3.3V and bandwidth <50MHz.

Best regards,
Gim Song

Switches & multiplexers

Switches & multiplexers forum

TS3V330: I2S signals 1:2 mux/demux