This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TS5A23159: Does sound come out when switching between NC and NO?

Expert 2700 points

Replies: 4

Views: 86

Part Number: TS5A23159

Hello,

My customer has a question about TS5A32159.

TS5A23159 is an SPDT type analog switch.
Does sound come out when switching between NC and NO?

Best Regards,

Kaede Kudo

  • Hi Keade Kudo,

    If there will be audible noise depends from the final application. But as in all switches there will be some noise induced while switching.

    We suggest the TS5A22364 that has an internal shunt resistor which helps to reduce pop noises when switching between two sources.

    Let us know if you have any other questions.

    Best regards,

    Ambroise 

  • In reply to Ambroise Suter:

    Hi Ambroise,

    Thank you for your reply.

    I understood your comment.

    I think that the audible noise depends on the final application.

    What my customer wanted to hear was whether they could hear a "click" like a relay switch.
    Do you know that there is no "click" sound?

    Best Regards,

    Kaede Kudo

  • In reply to KAEDE KUDO:

    Hi Kaede Kudo,

    As all our devices are integrated circuits, there wont be any audible noise or click from the device.

    The only possible noise would be noise in the electric signal when switching the signals.

    Best regards,

    Ambroise

  • In reply to Ambroise Suter:

    Hi Ambroise,

    Thank you for your answer.

    I understood your comment.

    I appreciate for your cooperation.

    Thank you.

    Kaede Kudo

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.