This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TMUX1208: Is TMUX1208 can use as I2C switch?

Intellectual 1970 points

Replies: 1

Views: 68

Part Number: TMUX1208

Hi Team,

I have a quick question as subject , is TMUX1208 can use as I2C switch?

I check with TI.com , TMUX1209 is OK for I2C used , since 1208 is same series with 1209 but not specific describe in TI.com to OK for I2C use also, so I would like to have a quick check , thanks!

 

  • Hi Andy,

    All passive FET switches the TMUX1208, TMUX1209 can support any protocol like I2C as long as the voltage and bandwidth of the protocol are within the recommended operating conditions of the device. 

    Thanks

    Saminah

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.