Part Number: TS5A3160
I'm posting on behalf of my customer:
I am looking at using your TS5A3160 parts for one of our applications. I would like to drive the logic input with an open-drain/collector signal for a cheap level shift. However, the data sheet shows a fairly high leakage current of 100uA for a 4.5V to 5.5V supply (section 6.5 vs 6.6). I suspect it may be a typo. Please confirm the question I have in the picture attached.
Your customer has correctly identified a mistake in the datasheet. The spec should read Iih, Iil input leakage with Vcc = 5,5 as +/- 100 nA.
Please allow 2 weeks for the change to take effect on the web.
In reply to Adam Torma:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.