This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: CD4053B
Tool/software: Code Composer Studio
if the power supply to CD4053 is VDD=5.5V VSS=0V VEE=-5.5V, can I use digital control signal at 3.3V (MCU IO) ?
Plus, is there a similar switch ic to CD4053 fitting to the above voltage setup, but with just two channels, I cannot find one. Just ask to make sure.
Thanks in advance
You cannot use digital control signal from your MCU I/O at 3.3 V to control CD4053B with VDD=5.5V VSS=0V VEE=-5.5V.
The Vih level scales with VDD-VEE as stated in the datasheet. The datasheet states with VEE=VSS and VDD 10V the Vih is 7V. When I tested in my lab Vih = ~ 5.9 V (there is some margin in the spec).
When I tested the device with VDD=5.5V VSS=0V VEE=-5.5V, Vih = ~0.4 V and Vil = ~-5 V.
The CD4053B is a 3 channel 2:1 switch. You can use the switch search tool on TI.com to filter on 2-channel 2:1 devices. When I did the search I found 38 different 2-channel 2:1 switches but none of them were dual supply which is what I think you are looking for. There should be some new devices coming in the future that are dual supply and 2-channel 2:1.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Adam Torma:
In reply to WANG NING:
If VDD=5.5V VSS=0V VEE=-5.5V, Vih ~0.4 V and Vil ~ -4.5 V. With the these power supply settings placing a 3.3 V signal on the CD4053B logic pin will set the switch logic high but 0V signal on the logic pin would not set it to logic low. To set a logic low with those power supply conditions ~-4.5 V would need to be placed on the logic control pins.
The control logic Vih and Vil levels of the signal switch scale with the potential across the VDD and VEE. Those logic input threasholds are also referenced to VEE.
Let me know if this help more with your understanding.
In CD4053 datasheet, Vil should be Vss=0V?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.