This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
CCS/TMS320C5535: CPU load graph show nothing
Part Number: TMS320C5515
Tool/software: Code Composer Studio
CPU load cannot show any data
The following is the version of the tools and software:
CCS version: 5.5.0.00077
C5500 Compiler Tools version: 4.4.1
DSP/BIOS version: 5.42.1.09
SYS/BIOS version: 184.108.40.206
The emulator that I used is Texas Instruments XDS100v2
Can anyone give step by step guideline to setup the configuration or installation of required software?
In reply to Qian Gui Loh:
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to ToddMullanix:
Surprisingly the stairstep example CPU load is working today. However, I tested on my own code it is not working and the screenshot attached below is the raw logs of my code.
There is nothing generated by CPU.
I not sure the way to turn on LOAD module even look at the stairstep example. Can you advise?
Thanks and regards,
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.