Having problem in connecting to DM357 EVM Board

Yang Yin

Other Parts Discussed in Thread: TMS320DM357

I'm using CCS 4.0.1 as IDE, and the Emulator is XDS510 USB. When I try to configure Target Configurations for the DM357 EVM board, I found there's no such chip in the default list ( TMS320DM357).

Which configuration should be choose for this EVM board?

[^o)]

over 14 years ago

0 Ki over 14 years ago

TI__Guru**** 420930 points

Hello,

If your target does not appear in the list of devices for the Basic Setup, you can use the advanced setup to create it manually. This requires some knowledge of the target. See the following for more details:

http://www.tiexpressdsp.com/index.php/Target_Configuration_-_Custom_Configurations

Thanks

0 JohnS over 14 years ago in reply to Ki

TI__Guru**** 159715 points

Another option is to select a device that has the same JTAG layout. For example I see EVMDM355 listed in the target setup tool. You could try selecting that file.

John

Code Composer Studio™︎

Code Composer Studio forum

Having problem in connecting to DM357 EVM Board