Using Uniflash blow MSP430 fuse

Ashley Kao

Intellectual 360 points

Other Parts Discussed in Thread: UNIFLASH

Can I use uniflash to blow fuse on MSP430?

If it's archive, how to setting it?

thanks

Ashley

over 9 years ago

0 Ryan Brown1 over 9 years ago

TI__Guru**** 223077 points

Moving this thread to the CCS forum where their experts will be able to give you proper guidance on Uniflash.

Regards,
Ryan

0 JohnS over 9 years ago in reply to Ryan Brown1

TI__Guru**** 163075 points

Ashley,

This functionality isn't available directly via the UniFlash GUI but is possible if using UniFlash from a script. Basically there is a call that can be made to Secure the device. processors.wiki.ti.com/.../UniFlash_Quick_Start_Guide

You would have to run the command to evaluate the expression 'GEL_SecureDevice'

The MSP Flasher tool has an option that can be passed as well to do this:

-f Permanently locks JTAG access to the target MSP Warning: The device will no longer be accessible via JTAG. This action is irreversible.

Regards,
John

Code Composer Studio™︎

Code Composer Studio forum

Using Uniflash blow MSP430 fuse