This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

trace analyzer

Other Parts Discussed in Thread: TMDSEMU560V2STM-U

Hi

My tools:

CCS: 3.3

DSP: C6455

OS: Win XP

EMU:  TMDSEMU560V2STM-U

TEXAS INSTRUMENTS TMDSEMU560V2STM-U

Question 1:

How can I use and run trace analyzer for my projects? Is it possible to use trace analyzer according to my tools?

Question 2:

Can you introduce me some references for using trace analyzer?

Best Regards

  • Hello,

    What is your exact emulator? Because you say that you have:

    dariush karami said:

    But the picture you posted is something else. It is an TMDSEMU560PCI.

    I assume you are using a TMDSEMU560PCI since the TMDSEMU560V2STM-U is NOT supported with CCSv3.3. I would like to confirm this.

    Also note that CCSv3.3 is very old and no longer supported. I would strongly encourage you to update to the latest CCSv6.2 version for the best support.

    Thanks

    ki

  • Hi

    Thanks for your advice, I will change my CCS version after I finish my current project. My emulator is TMDSEMU560PCI, 

    Regards

  • dariush karami said:
    My emulator is TMDSEMU560PCI

    The emulator does not support either Processor or System trace. There is also no ETB on the device that you can use. Also considering that you are using the old CCSv3.3, there is not many good trace options for your environment


    ki