CCS/TM4C123AE6PM: TM4C123AE6PM

Norbert Toth

Part Number: TM4C123AE6PM

Tool/software: Code Composer Studio

Hi Folks,

I have a custom developed board with TM4C123A controller, that I debug via DK-TM4C129X. When I launch my program, the debugger stops at beginning of the main(), but I cannot place breakpoints.

Double clicking on the sidebar, a strike-through breakpoint appear and the debugger is not stop there.

Can anybody help me, what did I miss?

Regards,

Norbert

over 7 years ago

0 Ki over 7 years ago

TI__Guru**** 420380 points

Hi Norbert,
Can you send a screenshot of CCS with both the set breakpoints in the editor and also with the breakpoints view open? Also, which exact version of CCS are you using?

Thanks
ki

0 Norbert Toth over 7 years ago in reply to Ki

Expert 1145 points

Hi,

The CCS version is: 6.2.0.00050 Below is the screen shot:

0 Ki over 7 years ago in reply to Norbert Toth

TI__Guru**** 420380 points

Please disable the button i highlighted in pink/red in the screenshot below (in the breakpoints view):

The button is for ignoring all set breakpoints.

Thanks

Code Composer Studio™︎

Code Composer Studio forum

CCS/TM4C123AE6PM: TM4C123AE6PM