CC3200: restore demo

Gean Paul Tura

Part Number: CC3200
Other Parts Discussed in Thread: UNIFLASH

Hi guys,

I followed the project zero wlan station on YouTube and I got it to work. How do I make the application permanent on my cc3200 so even after I unplugged it to my pc and connect it to an external power supply the code runs in production? Thanks in advance!

Paul

over 7 years ago

0 Hnz over 7 years ago

Guru 39650 points

Hi Paul,

You need to use Uniflash software and upload your code into external flash memory (sFLash). Uniflash can connect to CC3200 in bootloader mode. It need to be activate by closing jumper SOP2

Jan

0 Gean Paul Tura over 7 years ago in reply to Hnz

Prodigy 80 points

Ok so lets say my debugging was successful in CCS how do I move the files from CCS to Uniflash? Do you have a video or guide how to do it? I just started learning this today. Thanks for the response appreciate it.

0 Hnz over 7 years ago in reply to Gean Paul Tura

Guru 39650 points

Hi Paul,

- With CC3200 you need use Uniflash version 3.4 (latest version 4.x is not supported by CC3200).
- After successfully build you will have *.bin file inside you project directory (under Debug or Release subdirectory)
- Using uniflash you need upload this *.bin into into /sys/mcuimg.bin at sFlash of your CC3200 LP

Wiki page how to use Uniflash software ( processors.wiki.ti.com/.../CC3100_&_CC3200_UniFlash_Quick_Start_Guide )

Jan

0 Gean Paul Tura over 7 years ago in reply to Hnz

Prodigy 80 points

Hi Jan,

Thank you for the response I will try it now and let you know if it worked. Thanks

Paul

0 Gean Paul Tura over 7 years ago in reply to Hnz

Prodigy 80 points

Hi Jan,

I now understand how it works, thanks Jan. Cheers!

Paul

Wi-Fi

Wi-Fi forum

CC3200: restore demo