This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: Code Composer Studio
Thanks for the previous answer.
It's ok to use the lcdk with ccs v9. HOw ever, is there a way I can salvage my 50 C6713DSKs in the realm of ccsV9.
U of S
Daniel GaucherHOw ever, is there a way I can salvage my 50 C6713DSKs in the realm of ccsV9.
You will have to use an external debug probe attached to J8 of the DSK (see section 3.6.2 of the C6713DSK documentation). You will not be able to use the on-board debug probe since it is based off the obsolete XDS510USB, which is no longer supported by CCSv9.
If you wish to use the on-board probe, you will have to stick with CCSv8.3.
Did you read the CCS Forum Guidelines & FAQ? If not, PLEASE read it. If you haven't read it in awhile, please read it again to see if any updates were made.
Having CCS problems? Check out the CCS Troubleshooting Guide
Looking for CCS Training/Documentation? Check out the CCS Resources page
Curious about the status of a bug and know the tracking ID? Track it via the public bug tracking portal
NOTE: When a bug is filed and a tracking ID is provided, the thread may then be suggested as "TI Thinks Resolved". Why? Please read the first FAQ of the CCS Forum Guidelines & FAQ
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Hmm, that is a though scenario, especially due to the amount of boards you have.
You have two options:
- Stay with CCSv8.3.0 and use the built in XDS510USB Debug Probe. It is still pretty current and thoroughly supports the C67x family of devices.
- Update to CCSv9.0.0 and purchase TMDSEMU560V2STM-U Debug Probes. It will support CCSv9 and other architectures (such as the LCDK OMAPL138 mentioned in your other discussion). However, it is an expensive alternative.
I will try to contact other folks and see if they can propose alternatives.
I recently moved to the Bluetooth Low Energy group and I am not active on the Code Composer Studio forum anymore.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.