CCS/LAUNCHXL-CC2640R2: cc2640r2

vic vic2

Prodigy 20 points

Part Number: LAUNCHXL-CC2640R2

Tool/software: Code Composer Studio

In http://dev.ti.com/tirex/content/simplelink_cc2640r2_sdk_1_00_00_22/docs/blestack/html/oad/oad.html

figure 82, it shows 4 projects.

I could not locate the oad_target_cc2640r2lp_app and oad_target_cc2640r2lp_stack.

please tell me where to find them

over 4 years ago

0 Markel Robregado over 4 years ago

Guru 85655 points

Hi vic,

I suggest you use the latest SDK release. http://www.ti.com/tool/SIMPLELINK-CC2640R2-SDK

-kel

0 Tomasz Kocon over 4 years ago

Guru 26200 points

I agree with Markel.

vic vic2 said:
I could not locate the oad_target_cc2640r2lp_app and oad_target_cc2640r2lp_stack.

Both oad_target_* are parts of sdk v1.00.00.22 and build fine.
Install this SDKs and import both examples.

0 vic vic2 over 4 years ago in reply to Markel Robregado

Prodigy 20 points

Thank you. I am using the latest version (3.20.00.21) of SDK release from http://www.ti.com/tool/SIMPLELINK-CC2640R2-SDK

That does not contain oad_target_cc2640r2lp_app and oad_target_cc2640r2lp_stack.

>> Both oad_target_* are parts of sdk v1.00.00.22 and build fine.

From Tom's answer, it shows the latest TI SDK has removed the oad_target_* project and the documentation is obsolete.

0 Markel Robregado over 4 years ago in reply to vic vic2

Guru 85655 points

Hi vic,

The SDK 1.00 is the very first release 2 years ago. There were a lot of changes, improvements, bug fixes since then. So, it is best to use the latest SDK 3.20 release.

-kel

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-CC2640R2: cc2640r2