• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 232 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] CCS/EVM430-F6779: How to change the default baud rate generated by EMDC?

CCS/EVM430-I2040S: EVM430-i2040s

Anuradha Bulakh
Intellectual 480 points
Part Number: EVM430-I2040S
Other Parts Discussed in Thread: MSP430I2040

Tool/software: Code Composer Studio

I have generated code using EMDC for MSP430i2040 but when opened in CCS not able to configure for debugging or loading code in EVM.

Please explain me steps to import in CCS generated by EMDC.

Thanks,

Anuradha.

  • 0
    TI__Guru**** 159715 points

    Anuradha,

    When you state:

    Anuradha Bulakh said:
    when opened in CCS not able to configure for debugging or loading code in EVM

    Do you mean that you don't see the MSP430i2040 device available in CCS?  Are you getting a specific error in CCS?

    In general for a CCS project if you go to the project properties the device and debug connection are specified here:

    Regards,

    John