This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TDA2EVM5777: how to run multi_cam usecase in visonsdk

Part Number: TDA2EVM5777
Other Parts Discussed in Thread: PMP, DRA742, DRA752

Tool/software: Code Composer Studio

Hi  :

       i  am   use  SDK_VISION_03_04_00_00  now  single  cam  usecase  is  ok,  but   i   run  multi_cam  usecase  have  some  problem .  follow  is  the  log .


 _____                    _____           _         _
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|
              |___|                    |___|

Arago Project http://arago-project.org dra7xx-evm ttyS0

Arago 2016.12 dra7xx-evm ttyS0

dra7xx-evm login: ▒OMAP SD/MMC: 0, OMAP SD/MMC: 1
** First descriptor is NOT a primary desc on 1:1 **
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
ERROR: cannot find partition: 'userdata'

at arch/arm/cpu/armv7/omap-common/utils.c:199/mmc_get_part_size()
Warning: fastboot.userdata_size: unable to calc
SCSI:  SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net:
Warning: ethernet@48484000 using MAC address from ROM
eth0: ethernet@48484000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
243 bytes read in 2 ms (118.2 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
3560064 bytes read in 112 ms (30.3 MiB/s)
106875 bytes read in 16 ms (6.4 MiB/s)
Booting from mmc0 ...
Kernel image @ 0x82000000 [ 0x000000 - 0x365280 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Device Tree to 8ffe2000, end 8ffff17a ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.84-00027-g018eb62-dirty (hancan@hancan-virtual-machine) (gcc version 5.4.1 20170404 (Linaro GCC 5.4-2017.05) ) #7 SMP PREEMPT Sat Jan 26 11:33:13 CST 2019
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: TI DRA742
[    0.000000] Ignoring memory block 0x200000000 - 0x280000000
[    0.000000] Reserved memory: created DMA memory pool at 0x40300000, size 3 MiB
[    0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 80 MiB
[    0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x9e000000, size 32 MiB
[    0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created CMA memory pool at 0xa1000000, size 32 MiB
[    0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0xa3000000, size 32 MiB
[    0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created DMA memory pool at 0xa9000000, size 64 MiB
[    0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 24 MiB at 0xbe400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier
[    0.000000] DRA752 ES2.0
[    0.000000] PERCPU: Embedded 11 pages/cpu @ef630000 s14912 r8192 d21952 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243520
[    0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=/dev/nfs rw nfsroot=172.17.218.43:/home/hancan/PROCESSOR_SDK_VISION_03_04_00_00/ti_components/os_tools/linux/targetfs rootwait ip=dhcp mem=1024M
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 411856K/980992K available (6663K kernel code, 318K rwdata, 2392K rodata, 332K init, 286K bss, 364336K reserved, 204800K cma-reserved, 235520K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08e000c   (9057 kB)
[    0.000000]       .init : 0xc08e1000 - 0xc0934000   ( 332 kB)
[    0.000000]       .data : 0xc0934000 - 0xc09839e0   ( 319 kB)
[    0.000000]        .bss : 0xc0985000 - 0xc09cc980   ( 287 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div
[    0.000000] OMAP clockevent source: timer1 at 32786 Hz
[    0.000000] Architected cp15 timer(s) running at 6.14MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
[    0.000004] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
[    0.000016] Switching to timer-based delay loop, resolution 162ns
[    0.000335] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000343] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000791] Console: colour dummy device 80x30
[    0.000808] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000815] This ensures that you still see kernel messages. Please
[    0.000820] update your kernel commandline.
[    0.000834] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
[    0.000846] pid_max: default: 32768 minimum: 301
[    0.000943] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000953] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001492] Initializing cgroup subsys io
[    0.001509] Initializing cgroup subsys memory
[    0.001534] Initializing cgroup subsys devices
[    0.001547] Initializing cgroup subsys freezer
[    0.001558] Initializing cgroup subsys perf_event
[    0.001570] Initializing cgroup subsys pids
[    0.001596] CPU: Testing write buffer coherency: ok
[    0.001800] /cpus/cpu@0 missing clock-frequency property
[    0.001816] /cpus/cpu@1 missing clock-frequency property
[    0.001827] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001868] Setting up static identity map for 0x80008340 - 0x800083a0
[    0.080181] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.080250] Brought up 2 CPUs
[    0.080263] SMP: Total of 2 processors activated (24.59 BogoMIPS).
[    0.080269] CPU: All CPU(s) started in HYP mode.
[    0.080275] CPU: Virtualization extensions available.
[    0.081304] devtmpfs: initialized
[    0.110815] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.111773] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.317743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.317768] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.321826] pinctrl core: initialized pinctrl subsystem
[    0.322684] NET: Registered protocol family 16
[    0.323604] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.350248] cpuidle: using governor ladder
[    0.380280] cpuidle: using governor menu
[    0.388891] OMAP GPIO hardware version 0.1
[    0.395428] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
[    0.411953] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.411967] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    0.421594] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.421603] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.422076] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.422085] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.422561] OMAP DMA hardware revision 0.0
[    0.461516] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[    0.462680] edma 43300000.edma: memcpy is disabled
[    0.467328] edma 43300000.edma: TI EDMA DMA engine driver
[    0.471663] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[    0.471839] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[    0.471998] omap-iommu 58882000.mmu: 58882000.mmu registered
[    0.472154] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.472449] omap-iommu 41501000.mmu: 41501000.mmu registered
[    0.472640] omap-iommu 41502000.mmu: 41502000.mmu registered
[    0.475699] palmas 0-0058: IRQ missing: skipping irq request
[    0.491101] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0
[    0.563416] pcf857x 0-0020: probed
[    0.563976] pcf857x 0-0021: probed
[    0.564131] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    0.564529] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[    0.564735] media: Linux media interface: v0.10
[    0.564787] Linux video capture interface: v2.00
[    0.564827] pps_core: LinuxPPS API ver. 1 registered
[    0.564834] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.564863] PTP clock support registered
[    0.564908] EDAC MC: Ver: 3.0.0
[    0.565665] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[    0.565955] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[    0.566307] Advanced Linux Sound Architecture Driver Initialized.
[    0.567178] clocksource: Switched to clocksource arch_sys_counter
[    0.577767] NET: Registered protocol family 2
[    0.578262] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.578326] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.578451] TCP: Hash tables configured (established 8192 bind 8192)
[    0.578497] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.578529] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.578733] NET: Registered protocol family 1
[    0.578974] RPC: Registered named UNIX socket transport module.
[    0.578983] RPC: Registered udp transport module.
[    0.578989] RPC: Registered tcp transport module.
[    0.578995] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.580018] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.588935] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.589564] NFS: Registering the id_resolver key type
[    0.589596] Key type id_resolver registered
[    0.589604] Key type id_legacy registered
[    0.589671] ntfs: driver 2.1.32 [Flags: R/O].
[    0.590957] bounce: pool size: 64 pages
[    0.591103] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.591117] io scheduler noop registered
[    0.591128] io scheduler deadline registered
[    0.591158] io scheduler cfq registered (default)
[    0.596003] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128
[    0.599283] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges:
[    0.599296]   No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff]
[    0.599330]    IO 0x20003000..0x20012fff -> 0x00000000
[    0.599350]   MEM 0x20013000..0x2fffffff -> 0x20013000
[    0.629404] dra7-pcie 51000000.pcie_rc: link is not up
[    0.629579] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00
[    0.629592] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.629602] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.629612] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[    0.630013] PCI: bus0: Fast back to back transfers disabled
[    0.630136] PCI: bus1: Fast back to back transfers enabled
[    0.630217] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    0.630232] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[    0.630245] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.630461] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    0.691045] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.694369] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250
[    1.708080] console [ttyS0] enabled
[    1.712465] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250
[    1.722163] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250
[    1.732217] [drm] Initialized drm 1.1.0 20060810
[    1.737763] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.744408] [drm] No driver support for vblank timestamp query.
[    1.750558] [drm] Initialized vdrm 1.0.0 20110917 on minor 0
[    1.757751] OMAP DSS rev 6.1
[    1.761499] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
[    1.777054] loop: module loaded
[    1.780623] vmemexp device MAJOR num = 245
[    1.784750] vmemexp class registered
[    1.788485] /dev/vmemexp device registered
[    1.792600] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120
[    1.798319] nand: No NAND device found
[    1.802090] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch
[    1.812037] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes)
[    1.817457] 7 ofpart partitions found on MTD device spi32766.0
[    1.823316] Creating 7 MTD partitions on "spi32766.0":
[    1.828493] 0x000000000000-0x000000040000 : "QSPI.SPL"
[    1.834621] 0x000000040000-0x000000140000 : "QSPI.u-boot"
[    1.840990] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
[    1.847921] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
[    1.854576] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
[    1.861972] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
[    1.868304] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
[    1.876040] libphy: Fixed MDIO Bus: probed
[    1.927216] davinci_mdio 48485000.mdio: davinci mdio revision 1.6
[    1.933338] davinci_mdio 48485000.mdio: detected phy mask c278f2d1
[    1.940722] davinci_mdio: probe of 48485000.mdio failed with error -5
[    1.947867] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6
[    1.954523] cpsw 48484000.ethernet: cpts: overflow check period 800
[    1.961512] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7
[    1.970191] mousedev: PS/2 mouse device common for all mice
[    1.976424] i2c /dev entries driver
[    1.985169] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    1.990789] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode
[    1.997192] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode
[    2.003706] evm_3v3_sw: supplied by sysen1
[    2.090964] mmc0: MAN_BKOPS_EN bit is not set
[    2.102887] mmc0: new HS200 MMC card at address 0001
[    2.108341] mmcblk0: mmc0:0001 MMC08G 7.25 GiB
[    2.123141] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB
[    2.139413] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB
[    2.169056] ledtrig-cpu: registered to indicate activity on CPUs
[    2.178176] aic_dvdd: supplied by evm_3v3_sw
[    2.184095] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0
[    2.191604] NET: Registered protocol family 10
[    2.196860] sit: IPv6 over IPv4 tunneling driver
[    2.202104] NET: Registered protocol family 17
[    2.206785] Key type dns_resolver registered
[    2.211208] omap_voltage_late_init: Voltage driver support not added
[    2.218110] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    2.224319] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    2.231031] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    2.237280] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    2.245460] Power Management for TI OMAP4+ devices.
[    2.250552] Registering SWP/SWPB emulation handler
[    2.256284] dmm 4e000000.dmm: workaround for errata i878 in use
[    2.263495] dmm 4e000000.dmm: initialized all PAT entries
[    2.270782] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.277451] [drm] No driver support for vblank timestamp query.
[    2.283734] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1
[    2.290585] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    2.328413] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok
[    2.343610] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    2.352548] hctosys: unable to open rtc device (rtc0)
[    2.369057] net eth0: initializing cpsw version 1.15 (0)
[    2.374406] net eth0: initialized cpsw ale version 1.4
[    2.379616] net eth0: ALE Table size 1024
[    2.386369] libphy: PHY 48485000.mdio:02 not found
[    2.391207] net eth0: phy "48485000.mdio:02" not found on slave 0, err -19
[    2.404090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.409982] net eth1: initializing cpsw version 1.15 (0)
[    2.418137] libphy: PHY 48485000.mdio:03 not found
[    2.422948] net eth1: phy "48485000.mdio:03" not found on slave 1, err -19
[    2.434409] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    2.577039] mmc2: host does not support reading read-only switch, assuming write-enable
[    2.592105] mmc2: new ultra high speed DDR50 SDHC card at address aaaa
[    2.599141] mmcblk1: mmc2:aaaa SS08G 7.40 GiB
[    2.608894]  mmcblk1: p1 p2
[   12.437196] Waiting up to 110 more seconds for network.
[   22.437194] Waiting up to 100 more seconds for network.
[   32.437195] Waiting up to 90 more seconds for network.
[   42.437195] Waiting up to 80 more seconds for network.
[   52.437192] Waiting up to 70 more seconds for network.
▒OMAP SD/MMC: 0, OMAP SD/MMC: 1
** First descriptor is NOT a primary desc on 1:1 **
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
ERROR: cannot find partition: 'userdata'

at arch/arm/cpu/armv7/omap-common/utils.c:199/mmc_get_part_size()
Warning: fastboot.userdata_size: unable to calc
SCSI:  SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: 64bit ncq stag pm led clo only pmp pio slum part ccc apst
scanning bus for devices...
Found 0 device(s).
Net:
Warning: ethernet@48484000 using MAC address from ROM
eth0: ethernet@48484000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
reading boot.scr
** Unable to read file boot.scr **
reading uEnv.txt
243 bytes read in 2 ms (118.2 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc0 ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
3560064 bytes read in 112 ms (30.3 MiB/s)
106875 bytes read in 16 ms (6.4 MiB/s)
Booting from mmc0 ...
Kernel image @ 0x82000000 [ 0x000000 - 0x365280 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Device Tree to 8ffe2000, end 8ffff17a ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.84-00027-g018eb62-dirty (hancan@hancan-virtual-machine) (gcc version 5.4.1 20170404 (Linaro GCC 5.4-2017.05) ) #7 SMP PREEMPT Sat Jan 26 11:33:13 CST 2019
[    0.000000] CPU: ARMv7 Processor [412fc0f2] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine model: TI DRA742
[    0.000000] Ignoring memory block 0x200000000 - 0x280000000
[    0.000000] Reserved memory: created DMA memory pool at 0x40300000, size 3 MiB
[    0.000000] Reserved memory: initialized node cmem@40300000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created CMA memory pool at 0x99000000, size 80 MiB
[    0.000000] Reserved memory: initialized node ipu2_cma@95800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x9e000000, size 32 MiB
[    0.000000] Reserved memory: initialized node ipu1_cma@9d000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created CMA memory pool at 0xa1000000, size 32 MiB
[    0.000000] Reserved memory: initialized node dsp1_cma@99000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0xa3000000, size 32 MiB
[    0.000000] Reserved memory: initialized node dsp2_cma@9f000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: regions without no-map are not yet supported
[    0.000000] Reserved memory: created DMA memory pool at 0xa9000000, size 64 MiB
[    0.000000] Reserved memory: initialized node cmem@A9000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 24 MiB at 0xbe400000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] OMAP4: Map 0xbfe00000 to fe600000 for dram barrier
[    0.000000] DRA752 ES2.0
[    0.000000] PERCPU: Embedded 11 pages/cpu @ef630000 s14912 r8192 d21952 u45056
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243520
[    0.000000] Kernel command line: console=ttyO0,115200n8 vram=16M root=/dev/nfs rw nfsroot=172.17.218.43:/home/hancan/PROCESSOR_SDK_VISION_03_04_00_00/ti_components/os_tools/linux/targetfs rootwait ip=dhcp mem=1024M
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 411856K/980992K available (6663K kernel code, 318K rwdata, 2392K rodata, 332K init, 286K bss, 364336K reserved, 204800K cma-reserved, 235520K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08e000c   (9057 kB)
[    0.000000]       .init : 0xc08e1000 - 0xc0934000   ( 332 kB)
[    0.000000]       .data : 0xc0934000 - 0xc09839e0   ( 319 kB)
[    0.000000]        .bss : 0xc0985000 - 0xc09cc980   ( 287 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ti_dt_clocks_register: failed to lookup clock node gmac_gmii_ref_clk_div
[    0.000000] OMAP clockevent source: timer1 at 32786 Hz
[    0.000000] Architected cp15 timer(s) running at 6.14MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x16af5adb9, max_idle_ns: 440795202250 ns
[    0.000005] sched_clock: 56 bits at 6MHz, resolution 162ns, wraps every 4398046511023ns
[    0.000016] Switching to timer-based delay loop, resolution 162ns
[    0.000333] clocksource: 32k_counter: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 58327039986419 ns
[    0.000341] OMAP clocksource: 32k_counter at 32768 Hz
[    0.000798] Console: colour dummy device 80x30
[    0.000815] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[    0.000821] This ensures that you still see kernel messages. Please
[    0.000827] update your kernel commandline.
[    0.000840] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.29 BogoMIPS (lpj=61475)
[    0.000853] pid_max: default: 32768 minimum: 301
[    0.000950] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000960] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001500] Initializing cgroup subsys io
[    0.001516] Initializing cgroup subsys memory
[    0.001541] Initializing cgroup subsys devices
[    0.001553] Initializing cgroup subsys freezer
[    0.001564] Initializing cgroup subsys perf_event
[    0.001575] Initializing cgroup subsys pids
[    0.001602] CPU: Testing write buffer coherency: ok
[    0.001807] /cpus/cpu@0 missing clock-frequency property
[    0.001822] /cpus/cpu@1 missing clock-frequency property
[    0.001833] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001874] Setting up static identity map for 0x80008340 - 0x800083a0
[    0.080190] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.080258] Brought up 2 CPUs
[    0.080270] SMP: Total of 2 processors activated (24.59 BogoMIPS).
[    0.080277] CPU: All CPU(s) started in HYP mode.
[    0.080283] CPU: Virtualization extensions available.
[    0.081315] devtmpfs: initialized
[    0.110510] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.111467] omap_hwmod: l3_main_2 using broken dt data from ocp
[    0.315762] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.315787] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.319775] pinctrl core: initialized pinctrl subsystem
[    0.320674] NET: Registered protocol family 16
[    0.321610] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.350245] cpuidle: using governor ladder
[    0.380272] cpuidle: using governor menu
[    0.388871] OMAP GPIO hardware version 0.1
[    0.395379] irq: no irq domain found for /ocp/l4@4a000000/scm@2000/pinmux@1400 !
[    0.411882] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.411896] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    0.421521] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.421531] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.422001] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[    0.422010] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[    0.422488] OMAP DMA hardware revision 0.0
[    0.461463] omap-dma-engine 4a056000.dma-controller: OMAP DMA engine driver (LinkedList1/2/3 supported)
[    0.462624] edma 43300000.edma: memcpy is disabled
[    0.467282] edma 43300000.edma: TI EDMA DMA engine driver
[    0.471613] omap-iommu 40d01000.mmu: 40d01000.mmu registered
[    0.471790] omap-iommu 40d02000.mmu: 40d02000.mmu registered
[    0.471947] omap-iommu 58882000.mmu: 58882000.mmu registered
[    0.472100] omap-iommu 55082000.mmu: 55082000.mmu registered
[    0.472396] omap-iommu 41501000.mmu: 41501000.mmu registered
[    0.472583] omap-iommu 41502000.mmu: 41502000.mmu registered
[    0.475611] palmas 0-0058: IRQ missing: skipping irq request
[    0.491034] palmas 0-0058: Muxing GPIO 2e, PWM 0, LED 0
[    0.563350] pcf857x 0-0020: probed
[    0.563911] pcf857x 0-0021: probed
[    0.564065] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz
[    0.564462] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz
[    0.564669] media: Linux media interface: v0.10
[    0.564720] Linux video capture interface: v2.00
[    0.564760] pps_core: LinuxPPS API ver. 1 registered
[    0.564767] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.564796] PTP clock support registered
[    0.564841] EDAC MC: Ver: 3.0.0
[    0.565596] omap-mailbox 48840000.mailbox: omap mailbox rev 0x400
[    0.565885] omap-mailbox 48842000.mailbox: omap mailbox rev 0x400
[    0.566235] Advanced Linux Sound Architecture Driver Initialized.
[    0.567101] clocksource: Switched to clocksource arch_sys_counter
[    0.577710] NET: Registered protocol family 2
[    0.578209] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.578273] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.578397] TCP: Hash tables configured (established 8192 bind 8192)
[    0.578446] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.578477] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.578678] NET: Registered protocol family 1
[    0.578939] RPC: Registered named UNIX socket transport module.
[    0.578948] RPC: Registered udp transport module.
[    0.578954] RPC: Registered tcp transport module.
[    0.578960] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.579983] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    0.588912] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.589547] NFS: Registering the id_resolver key type
[    0.589575] Key type id_resolver registered
[    0.589583] Key type id_legacy registered
[    0.589649] ntfs: driver 2.1.32 [Flags: R/O].
[    0.590935] bounce: pool size: 64 pages
[    0.591084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.591099] io scheduler noop registered
[    0.591110] io scheduler deadline registered
[    0.591140] io scheduler cfq registered (default)
[    0.595990] pinctrl-single 4a003400.pinmux: 282 pins at pa fc003400 size 1128
[    0.599320] PCI host bridge /ocp/axi@0/pcie_rc@51000000 ranges:
[    0.599332]   No bus range found for /ocp/axi@0/pcie_rc@51000000, using [bus 00-ff]
[    0.599366]    IO 0x20003000..0x20012fff -> 0x00000000
[    0.599386]   MEM 0x20013000..0x2fffffff -> 0x20013000
[    0.629533] dra7-pcie 51000000.pcie_rc: link is not up
[    0.629709] dra7-pcie 51000000.pcie_rc: PCI host bridge to bus 0000:00
[    0.629722] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.629732] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.629741] pci_bus 0000:00: root bus resource [mem 0x20013000-0x2fffffff]
[    0.630147] PCI: bus0: Fast back to back transfers disabled
[    0.630271] PCI: bus1: Fast back to back transfers enabled
[    0.630354] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff]
[    0.630369] pci 0000:00:00.0: BAR 1: assigned [mem 0x20020000-0x2002ffff]
[    0.630382] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.630595] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    0.690532] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    0.693852] 4806a000.serial: ttyS0 at MMIO 0x4806a000 (irq = 301, base_baud = 3000000) is a 8250
[    1.707503] console [ttyS0] enabled
[    1.711887] 4806c000.serial: ttyS1 at MMIO 0x4806c000 (irq = 302, base_baud = 3000000) is a 8250
[    1.721578] 48020000.serial: ttyS2 at MMIO 0x48020000 (irq = 303, base_baud = 3000000) is a 8250
[    1.731632] [drm] Initialized drm 1.1.0 20060810
[    1.737167] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.743811] [drm] No driver support for vblank timestamp query.
[    1.749958] [drm] Initialized vdrm 1.0.0 20110917 on minor 0
[    1.757164] OMAP DSS rev 6.1
[    1.760914] omapdss_dss 58000000.dss: bound 58001000.dispc (ops dispc_component_ops)
[    1.776462] loop: module loaded
[    1.780032] vmemexp device MAJOR num = 245
[    1.784161] vmemexp class registered
[    1.787894] /dev/vmemexp device registered
[    1.792010] ioctl DBUFIOC_EXPORT_VIRTMEM = -1072899120
[    1.797734] nand: No NAND device found
[    1.801505] omap2-nand 8000000.nand: scan failed, may be bus-width mismatch
[    1.811410] m25p80 spi32766.0: s25fl256s1 (32768 Kbytes)
[    1.816806] 7 ofpart partitions found on MTD device spi32766.0
[    1.822690] Creating 7 MTD partitions on "spi32766.0":
[    1.827869] 0x000000000000-0x000000040000 : "QSPI.SPL"
[    1.834010] 0x000000040000-0x000000140000 : "QSPI.u-boot"
[    1.840380] 0x000000140000-0x0000001c0000 : "QSPI.u-boot-spl-os"
[    1.847312] 0x0000001c0000-0x0000001d0000 : "QSPI.u-boot-env"
[    1.853971] 0x0000001d0000-0x0000001e0000 : "QSPI.u-boot-env.backup1"
[    1.861373] 0x0000001e0000-0x0000009e0000 : "QSPI.kernel"
[    1.867718] 0x0000009e0000-0x000002000000 : "QSPI.file-system"
[    1.875457] libphy: Fixed MDIO Bus: probed
[    1.927132] davinci_mdio 48485000.mdio: davinci mdio revision 1.6
[    1.933258] davinci_mdio 48485000.mdio: detected phy mask cce2b9b1
[    1.947134] davinci_mdio: probe of 48485000.mdio failed with error -5
[    1.954273] cpsw 48484000.ethernet: Detected MACID = 7c:38:66:a1:e2:a6
[    1.960944] cpsw 48484000.ethernet: cpts: overflow check period 800
[    1.967920] cpsw 48484000.ethernet: cpsw: Detected MACID = 7c:38:66:a1:e2:a7
[    1.976574] mousedev: PS/2 mouse device common for all mice
[    1.982764] i2c /dev entries driver
[    1.991474] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    1.997078] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr25 mode
[    2.003480] omap_hsmmc 480b4000.mmc: no pinctrl state for sdr12 mode
[    2.010010] evm_3v3_sw: supplied by sysen1
[    2.090891] mmc0: MAN_BKOPS_EN bit is not set
[    2.102833] mmc0: new HS200 MMC card at address 0001
[    2.108286] mmcblk0: mmc0:0001 MMC08G 7.25 GiB
[    2.123085] mmcblk0boot0: mmc0:0001 MMC08G partition 1 8.00 MiB
[    2.139354] mmcblk0boot1: mmc0:0001 MMC08G partition 2 8.00 MiB
[    2.168955] ledtrig-cpu: registered to indicate activity on CPUs
[    2.178069] aic_dvdd: supplied by evm_3v3_sw
[    2.184004] davinci-mcasp 4847c000.mcasp: invalid tdm slots: 0
[    2.191506] NET: Registered protocol family 10
[    2.196758] sit: IPv6 over IPv4 tunneling driver
[    2.201996] NET: Registered protocol family 17
[    2.206673] Key type dns_resolver registered
[    2.211104] omap_voltage_late_init: Voltage driver support not added
[    2.218004] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    2.224212] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    2.230928] Adding alias for supply vdd,cpu0 -> vdd,4a003b20.oppdm
[    2.237176] Adding alias for supply vbb,cpu0 -> vbb,4a003b20.oppdm
[    2.245350] Power Management for TI OMAP4+ devices.
[    2.250443] Registering SWP/SWPB emulation handler
[    2.256173] dmm 4e000000.dmm: workaround for errata i878 in use
[    2.263411] dmm 4e000000.dmm: initialized all PAT entries
[    2.270693] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.277361] [drm] No driver support for vblank timestamp query.
[    2.283642] [drm] Initialized omapdrm 1.0.0 20110917 on minor 1
[    2.290491] omap_hsmmc 4809c000.mmc: Got CD GPIO
[    2.328329] asoc-simple-card sound0: tlv320aic3x-hifi <-> 48468000.mcasp mapping ok
[    2.340541] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[    2.347440] hctosys: unable to open rtc device (rtc0)
[    2.360753] net eth0: initializing cpsw version 1.15 (0)
[    2.366103] net eth0: initialized cpsw ale version 1.4
[    2.371289] net eth0: ALE Table size 1024
[    2.378053] libphy: PHY 48485000.mdio:02 not found
[    2.382862] net eth0: phy "48485000.mdio:02" not found on slave 0, err -19
[    2.395720] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.401610] net eth1: initializing cpsw version 1.15 (0)
[    2.409737] libphy: PHY 48485000.mdio:03 not found
[    2.414549] net eth1: phy "48485000.mdio:03" not found on slave 1, err -19
[    2.426037] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    2.576966] mmc2: host does not support reading read-only switch, assuming write-enable
[    2.592032] mmc2: new ultra high speed DDR50 SDHC card at address aaaa
[    2.599398] mmcblk1: mmc2:aaaa SS08G 7.40 GiB
[    2.609168]  mmcblk1: p1 p2
[   12.427116] Waiting up to 110 more seconds for network.
[   22.427111] Waiting up to 100 more seconds for network.

     i  dont  know  what  is the problem?

thanks

shuai