CCS/LAUNCHXL-CC1350-4: Adding peripherals to example code

Sabin John

Part Number: LAUNCHXL-CC1350-4
Other Parts Discussed in Thread: SYSCONFIG

Tool/software: Code Composer Studio

Is there any way to add drivers to existing example projects using the .cfg file? I have been reading the forums but I haven't been able to find a solution. Is it possible to to combine multiple example projects of different peripherals. I am using CCS 9.3 and resource explorer to generate code.

Regards,

Sabin

over 4 years ago

0 IUsedToBeARealPerson (M-W) over 4 years ago

TI__Guru 58425 points

Hi Sabin,

The ".cfg" file only configures the TI-RTOS kernel and which modules it should include. Peripheral drivers is not part of this configuration file. I suggest you look at the driver examples on how to import and use different drivers.

0 Sabin John over 4 years ago in reply to IUsedToBeARealPerson (M-W)

Intellectual 475 points

Thank you for your response! Is it possible to generate driver code through the SYSCONFIG utility?

Regards,

Sabin

0 IUsedToBeARealPerson (M-W) over 4 years ago in reply to Sabin John

TI__Guru 58425 points

Hi Sabin,

SysConfig does not generate driver code, it will however generate the structures needed in order to use the drivers.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-CC1350-4: Adding peripherals to example code