Code Composer Studio™︎

Code Composer Studio forum

State TI Thinks Resolved
Locked Locked
Replies 10 replies
Answers 4 answers
Subscribers 53 subscribers
Views 1003 views
Users 0 members are here

Support feedback

Options

Options

Related

CCS / IWR1642： New project based on SBL in SDK3303

user5216342

Intellectual 620 points

Part Number: IWR1642

Tool/software: Code Composer Studio

I am building a new project based on the SBL in SDK3303.
But I have a problem, as shown in below.
Based on previous answers, I knew that I wanted to add a path to file Serach Path, but I still got these errors even after I added a partial path.
Can you tell me which paths to add to solve these problems?
I'm working on millimeter wave radar. Thank you.

over 5 years ago

0 Yogesh Siraswar over 5 years ago

TI__Mastermind 21465 points

Hi,

The SBL in SDK is makefile based application. Please use following steps:

1) cd C:\ti\mmwave_sdk_03_03_00_03\packages\scripts\windows

2) setenv.bat

3) cd C:\ti\mmwave_sdk_03_03_00_03\packages\ti\utils\sbl

4) gmake all

Please check for any errors.

Thanks

Yogesh

0 user5216342 over 5 years ago in reply to Yogesh Siraswar

Intellectual 620 points

I don't quite understand what you mean. Could you tell me more about it?I run Setenv. bat as I understand it, but when I run SBL, I still get errors, the same error I mentioned earlier.SBL is a project I built using the SBL in SDK3303.

0 Yogesh Siraswar over 5 years ago in reply to user5216342

TI__Mastermind 21465 points

Hi,

Have you worked with GNU makefile ?

Yogesh

0 user5216342 over 5 years ago in reply to Yogesh Siraswar

Intellectual 620 points

NO

0 Yogesh Siraswar over 5 years ago in reply to user5216342

TI__Mastermind 21465 points

Hi,

Please type "cmd" in windows search and open the "command prompt".

Type the following command highlighted in bold on the command terminal:

C:\>cd C:\ti\mmwave_sdk_03_03_00_03\packages\scripts\windows

C:\ti\mmwave_sdk_03_03_00_03\packages\scripts\windows>setenv.bat

C:\ti\mmwave_sdk_03_03_00_03\packages\scripts\windows>cd C:\ti\mmwave_sdk_03_03_00_03\packages\ti\utils\sbl

C:\ti\mmwave_sdk_03_03_00_03\packages\ti\utils\sbl>gmake all

Share me the log if it doesn't work.

Thanks

Yogesh

0 user5216342 over 5 years ago in reply to Yogesh Siraswar

Intellectual 620 points

I want to build a new project based on the SBL in SDK3303.

To avoid some mistakes, I want to make sure that when I build a project, which of the following should I choose?

Thank you.

0 Yogesh Siraswar over 5 years ago in reply to user5216342

TI__Mastermind 21465 points

Hi,

As I have already stated, the CCS project is not supported for the SBL. Please use the gnu makefile.

Thanks

Yogesh

0 user5216342 over 5 years ago in reply to Yogesh Siraswar

Intellectual 620 points

Ok, I see. Thank you.

0 Yogesh Siraswar over 5 years ago in reply to user5216342

TI__Mastermind 21465 points

Please switch to gmake build environment. I am closing this thread.

0 Yogesh Siraswar over 5 years ago in reply to Yogesh Siraswar

TI__Mastermind 21465 points

Hi

If you cannot switch to gmake, please help yourself to get the CCS project working using online resources. Sorry we cannot help more than this.

Thanks

Yogesh