• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 649 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CC1312R: When loading from the bim into an image, std::time (RTC) doesn't seem to work?

CCS/CC1312R: Have Processors Wiki pages relating to clock and time Functions and CIO been migrated to other pages?

Chester Gillon
Guru 92251 points

Part Number: CC1312R

Tool/software: Code Composer Studio

Have any of the following been migrated from the Processors Wiki pages to other pages?

I think the pages are still useful, and on a quick search couldn't seem to find that the content has been migrated.

  • 0
    TI__Guru**** 163015 points

    Chester,

    I took a look at the migration plan and none of these are marked to be migrated as their view counts are very low.  We will still have access to the original pages inside TI so we could always migrate them later if there is a need.  

    I will double check to see if the content has been incorporated to anything else.

    Regards,

    John

  • 0
    TI__Guru**** 252660 points

    Regarding the time and clock functions ... I agree the compiler manual should document that the epoch can be changed from 1900 to 1970 by defining the preprocessor symbol __TI_TIME_USES_64.  So I filed EXT_EP-10174 to have the compiler manuals updated.  You are welcome to use that link to follow the issue.  The other details covered in this articles came up on the forum very infrequently, and so I am less concerned about them.

    Regarding the C I/O protocol ... The core details in this article are covered in the compiler manuals.  The remaining details are rarely discussed on the forum, so they too are of little concern.

    Thanks and regards,

    -George