Tool/software: TI C/C++ Compiler
I have .tcs file I need to load the configuration file. Please help me how to proceed
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
If I understand your question correctly, you have generated the settings you want in TICS Pro, and now want to export them to the device. (If I misunderstood, please reply with clarification.)
TICS Pro has an option to export the register settings in the .tcs file as raw hexadecimal. Load the .tcs file, then click File→Export hex register values:
The exported register data can then be copied to a microcontroller, FPGA, or other device for programming the register settings. Any device which can act as a SPI bus master should be sufficient to program the LMK04208.
I am asking other way round
I have a .tcs file with me
Now I want this file to import in the TICS pro to make some changes and generate a new .tcs
I dont know how to import this config file
I tried with File-->Import hex value register but this file did not appear in the list
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.