Hello Everyone,
I am working with TMDSEVM6678 Multiprocessor DSP . I am getting the error while loading the code (program).I have even tried changing the device endianness even though I am getting the same error.
https://www.ti.com/tool/TMDSEVM6678?keyMatch=&tisearch=search-everything&usecase=hardware
Thanks
Kushal,
Good day!.
To load the program using CCS, your DIP switch settings should be in "No Boot" mode.
Follow these steps:
1.Create "Target configuration" and do "Test connection" on C6678 EVM ---
2. Load and run the gel file on C6678 EVM. --
3. . Load and run the platform test on C6678 EVM --
Let me know how it goes after following these steps.
Regards
Shankari G
