CODECOMPOSER: Sysconfig CLB Tile Design settings reset when changing tile Name?

Alex Ridge

Part Number: CODECOMPOSER
Other Parts Discussed in Thread: SYSCONFIG, C2000WARE, LAUNCHXL-F28P65X

I have been using sysconfig (version 1.19.0.3426) in CCS (version 12.6.0.00008) and I have come across some unexpected behaviour in the Configurable Logic Block > Tile Design window.

When changing the Name entry of an existing Tile in the tile design window, existing settings for that tile are cleared to defaults.

Original display:

..after changing tile name only:

Is this expected behaviour?

It would be useful to be able to adjust the name of the tile without having to go through and re-input all the tile settings.

Thanks,
Alex

over 2 years ago

0 Ki over 2 years ago

TI__Guru**** 478571 points

Hi Alex,

Can you specify which device you are working on and if the sysconfig file in question was originally from an SDK example (and if so which one)?

Thanks

0 Alex Ridge over 2 years ago in reply to Ki

Prodigy 50 points

Hi Ki,

I have just tested and am able to reproduce the above behavior with the following steps:

- open CCS

- import the example "C2000 real-time microcontrollers/Embedded Software/C2000Ware (5.01.00.00)/English/Devices/F28P65X/F28P650DK9/Examples/Driverlib/c28x/clb/clb_empty" (I did so via resource explorer)

- open empty.sysconfig under that project and change one of the tile design settings to a non-default value (I changed some under Output Look-Up Table 0)

- Change the "Name" field.

- The display refreshes / settings categories collapse. When I expand to look at the settings again (e.g. under Output Look-Up Table 0) they have reverted back to defaults.

I've seen the same behaviour with sysconfig files from other examples in the clb folder too.

I'm working with a LAUNCHXL-F28P65X launchpad board.

Hope that helps,

Thanks
Alex

+1 Ki over 2 years ago in reply to Alex Ridge

TI__Guru**** 478571 points

Thanks for the details. I was able to reproduce the issue. I filed a bug for this. Tracking link: https://sir.ext.ti.com/jira/browse/EXT_EP-11682

Thanks

0 Alex Ridge over 2 years ago in reply to Ki

Prodigy 50 points

Thanks Ki, look forward to the bug fix. Alex

Code Composer Studio™︎

Code Composer Studio forum

CODECOMPOSER: Sysconfig CLB Tile Design settings reset when changing tile Name?