Davinci DM365 for this i am using the CCSv5 software creating a project & debugging the small prog on linux (ubuntu 11.10)

anil kumar89919

Prodigy 250 points

Hi All

I am new to CCSv5

g-noon.........!!

MY OS: Linux (ubuntu 11.10)

S.W: CCSv5

1.how to creat a project using ccsv5 .

2.how to debugging the on pro

3.how to add the prog

4.how to add the program to project .

5.one EX program

6.what is the cross compiler for DM365 -Davinci

please give me the solutions

--------------------thanks for giving answers -------------------------------

Anil Kumar

over 13 years ago

0 Siddharth Heroor over 13 years ago

TI__Expert 4245 points

Hi Anil,

I presume you are asking about how to get started with CCS running on a Linux PC. http://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v5 has starting information on CCSv5.

I'm also moving this post to the CCS forum so that other experts can help with your query.

0 AartiG over 13 years ago

TI__Guru**** 173310 points

Anil,

The CCSv5 wiki has very useful technical information to help you get started: http://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v5

To get started with building native code for the ARM or DSP, the CCSv5 Getting Started guide should be helpful. This assumes you want to use the TI compiler tools to build code for either the ARM or DSP and load the code on the device using JTAG emulation.

If you are looking to run and debug linux applications, please check this article: http://processors.wiki.ti.com/index.php/Linux_Debug_in_CCSv5

Code Composer Studio™︎

Code Composer Studio forum

Davinci DM365 for this i am using the CCSv5 software creating a project & debugging the small prog on linux (ubuntu 11.10)