CCS5.4 stopped recognizing XDCtools / SYS/BIOS

Vasili Galka

Hi,

For some reason my CCS stopped recognizing XDCtools / SYS/BIOS. The problem presents itself as following:

1. When I try opening RTOS Object View (ROV) it presents me with the following message: "XDC tools and XDC Path configuration must be specified..."

In the following dialog it says SYS/BIOS is not installed:

2. The "TI resource explorer" doesn't show SYS/BIOS group with examples any longer.

All this regardless the fact that C:/TI folder has xdctools and sys/bios as it should.

I would appreciate your assistance.

Regards,
Vasili

over 12 years ago

0 Gautam Iyer over 12 years ago

Guru 192875 points

Hi,

Did you try re-installing over the previous copy?

Regards,

Gautam

0 Vasili Galka over 12 years ago in reply to Gautam Iyer

Expert 2690 points

Hi,

I tried reinstalling XDCtools and SYS/BIOS. But it did not help.

Now I'm trying to uninstall/reinstall the whole CCS. Unfortunately, it takes a long time :-(

Best,
Vasili

0 Gautam Iyer over 12 years ago in reply to Vasili Galka

Guru 192875 points

Yup, I know. I hope that solves your issue. If not we'll have to figure out something else.

Regards,

Gautam

0 Vasili Galka over 12 years ago in reply to Gautam Iyer

Expert 2690 points

Yeah, it solved. Thanks!
Although I'm still curious what could caused the phenomenon...

0 Gautam Iyer over 12 years ago in reply to Vasili Galka

Guru 192875 points

Some instability... :)

Code Composer Studio™︎

Code Composer Studio forum

CCS5.4 stopped recognizing XDCtools / SYS/BIOS