'Run -> Load -> Verify program... ' How 'Verify Program...' can be done?

Hi again Malevi,

When you go to Run -> Load -> Verify program (Option available only while debugging else it would be greyed out)

It 'll ask you to verify the out file with the loaded one. If the file matches with the one present in the controller it will display a verified message like:

C28xx: Program verification successful for C:\Users\Gautam Iyer\workspace_v5_5\LCD_Interface_MSP430\Debug\Example_2833xSci_echoback.out

Regards,

Gautam

Hi Gautam!!..: )

I can load the program when debugging,

But a problem exist, of course..: )

I work in this way,

1- Import a project from TI Resource Explorer

2- Choose my device

3- Build it,

4- push the debug button,

5- when I get in debug mode push 'load'

Bu program doesn't work;

I use MSP430G2353 and MSP-FET430UIF,

Did I make a mistake when I use the program?

I think, exactly I make..: )

Kind Regards

Malevi

Merry Christmas, Malevi!

5- when I get in debug mode push 'load'

Bu program doesn't work;

Can you elaborate on the above? Further if you can attach a screenshot I would get a clear picture.

Regards,

Gautam

Merry Christmas Gautam..: )

I add a picture taken after load process, 

Thanks again for your dealing,

Kind Regards,

Malevi

You mean to say that LEDs are not blinking? Did you press the play button ?

Also, the error you're getting 0xc05e; you can ignore.

Regards,

Gautam

I want to use UART; for this, I use project from TI Resource Explorer,

I push play button, nothing happen,

Also, can I programming MSP430 without debugging? Just programme the flash is not enough for MSP430

Kind regards,

Malevi

Also, can I programming MSP430 without debugging? Just programme the flash is not enough for MSP430

Yes you can do it by using CCS Uniflash. Build your project -> Program your MSP430.

Download it from here: http://processors.wiki.ti.com/index.php/Category:CCS_UniFlash

Regards,

Gautam

Merry Christmas Gautam!..: )

Thanks for all your support,

I can build project and programme MSP430G2353,

But i have another problem on UART RX Interrupt; So, see you on another topic..: )

Kind Regards,

Merry Christmas,

Malevi