Use CCS for Beagleboard

Hi Bhargav,

Can you provide more details? See: http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/3131.aspx

Thanks

ki

I have B6 Rev. Beagleboard and i am trying to connect it to CCS v3.3 using:

Blackhawk USB560m - OMAP3530 Beagleboard or

Blackhawk USB560bp - OMAP3530 Beagleboard

as target boards.

But it says, "Error initializing emulator"

What could be the problem?

And sorry, i was not aware of the link.

Are you using the latest Service Release for 3.3?

Yes, i am using the latest one Service Release 12.1 (3.3.82.13)

Also i might be asking a silly question, but sorry for that.

Do i require any extra hardware to connect this. Right now i am using mini-USB to USB cable to connect the Beagleboard to the computer. Also i have Blackhawk Control Panel, but it does not show Beagleboard as a device attached to the system. Do i require to install some driver file to connect this?

Thanks for your quick replies!

Thanks so much ki for this info. I spent much time in figuring out why it was not working!