Having license problems with CCS v6

Oscar Azofeifa

I´m having problems with my TI software. Specifically with Code Composer Studio 6. I´m triying to download my code to my MCU, and the MCU doesn´t change internally. I get a message from the process bar that says "acquire license (sleeping)". Does this means I´m having problems with my license?

over 11 years ago

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Oscar,

Which MCU are you using? Also, what license is currently installed?

Regards,
Gautam

0 Oscar Azofeifa over 11 years ago in reply to Gautam Iyer

Prodigy 170 points

Hi, i have an f28335, and I have a free license, but time have not expired yet. I tried using other computer with other license and other CCS version, and still didn´t work. I can see the code it´s not loading, because LED doesn´t sparks, but the composer belief it recieves the data. What could it be??

0 Gautam Iyer over 11 years ago in reply to Oscar Azofeifa

Guru 192875 points

Free License is forever until you use a Dev kit or XDS100 emulator. I would like you to re-initiate the license by going to Help -> CCS Licensing and activate Free License again.

Also, you can refer this workshop for step by step execution:

Regards,

Gautam

0 Oscar Azofeifa over 11 years ago in reply to Gautam Iyer

Prodigy 170 points

I´m starting to think this is a hardware problem, because composer thinks is eerasing flash sectors but code continues running. It doesn´t deleate previous code.

0 Oscar Azofeifa over 11 years ago in reply to Oscar Azofeifa

Prodigy 170 points

It was something of hardware, some LED is broken and it was condusing me. Problem solved. Thaks for your support!

0 Gautam Iyer over 11 years ago in reply to Oscar Azofeifa

Guru 192875 points

Excelent!

Goodluck & Regards,
Gautam

Code Composer Studio™︎

Code Composer Studio forum

Having license problems with CCS v6