#include<xdc/std.h> not found in project with separate config project

Mark Piontek

Hi all,

I already posted a question in the TI/RTOS forum, because I thought it is related to my TI/RTOS configuration:

http://e2e.ti.com/support/embedded/tirtos/f/355/p/402711/1436673#1436673

Sasha Slijepcevic found out this is a CCS problem and recommended to move the thread to the CCS forum.
Unfortunately I haven't found a way how to move a thread from one forum to another, so the link is all I have.

I'm using CCS 6.0.1 on Windows 7, 32-bit, Service Pack 1

over 11 years ago

0 AartiG over 11 years ago

TI__Guru**** 173310 points

I can reproduce the issue but haven't found a way to workaround the linker error either.

When using the TI compiler tools, the -l option to pass the linker.cmd will work, however with GNU tools it appears that the -l is not the correct option for specifying a linker command file.

I will file a bug report for this and also see if I can get someone else to comment on whether there is a way to workaround this.

0 AartiG over 11 years ago in reply to AartiG

TI__Guru**** 173310 points

FYI, the tracking number for this bug is SDSCM00051620.

Code Composer Studio™︎

Code Composer Studio forum

#include<xdc/std.h> not found in project with separate config project