Migrate V/F project from CC3.3 to CCS6

Masky

Hi everyone,

I have migrated a FOC project from CCS3.3 to CCS6. The project is working in CCS3.3 for a few years, but when this is built in CCS6, I get this error:

undefined first referenced
symbol in file
--------- ----------------
_vhz_prof_calc C:/Users/fcastillo/Desktop/v97.xx iman CENE/TK-DOD/delta_120_006_e_1_enc/Debug/varOper.obj

error #10234-D: unresolved symbols remain

Any idea? Thank you in advance.

over 10 years ago

0 Ki over 10 years ago

TI__Guru**** 479001 points

Hello,
The meaning of that error message is described in the link below:
processors.wiki.ti.com/.../10234

Basically, you need to find out where vhz_prof_calc is defined and make sure you include the object file for it (usually a library)

Thanks
ki

0 AartiG over 10 years ago

TI__Guru**** 173310 points

Please see http://processors.wiki.ti.com/index.php/Compiler/diagnostic_messages/10234

As explained in that link, you need to determine where that symbol is defined (either in a source file or library) and make sure that file or library is added to the project.

Code Composer Studio™︎

Code Composer Studio forum

Migrate V/F project from CC3.3 to CCS6