• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 743 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler/MSP430AFE231: How to configure simulink to generate ccs environment can be compiled

user5007740
Prodigy 40 points
Part Number: MSP430AFE231

Tool/software: TI C/C++ Compiler

How to configure simulink to generate ccs environment can be compiled

  • 0
    TI__Guru**** 455791 points
    Hello,
    This question is more specific to Simulink/MATLAB itself than CCS so it is best to contact Mathworks support directly for assistance

    However there are some people on this forum who are quite knowledgeable with MATLAB (including a Mathworks representative) so I will leave your thread here in case they can comment on your issue.

    Thanks
    ki
  • 0 in reply to Ki
    Mastermind 9005 points

    We don't have specific MSP430 support, so you would typically generate C code of your algorithm from your Simulink model and then import that C code into your CCS project and go from there - with download and debugging using CCS as you normally would.

    We do support MSP-EXP430-G2 LuanchPads via our Embedded Coder Target for Energia. 

    HTH,

    -Brian