C55xx_0: File Loader: Data verification failed at address 0x00FFFF00 Please verify target memory and memory map.

Frederico

Other Parts Discussed in Thread: TMS320VC5507

Hi,

When I try to lauch debug with an XDS100V2 connected with MMB0 mother board (Burr Brown) that it has TMS320VC5507 DSP , Code Composer V4.1.3 returns this error:

C55xx_0: File Loader: Data verification failed at address 0x00FFFF00 Please verify target memory and memory map. Error found during data verification. Ensure the linker command file matches the memory map.

I suppose the problem is in configuration of memory map but I don´t know what files that I have to verify where is the problem. I was tried to reset my workspace like this tutorial but it not works.

http://processors.wiki.ti.com/index.php/Troubleshooting_CCS

I post a video that shows the error.

http://www.youtube.com/watch?v=goJTrRnQ_zQ

Thanks

over 15 years ago

0 Ki over 15 years ago

TI__Guru**** 478801 points

Thank you for taking the time to make a video. It was very useful.

Since your project does not have a linker command file (*.cmd), it is placing your code in default locations. You should add a linker command file to you project.

See: http://focus.ti.com/lit/ug/spru280h/spru280h.pdf for more information on linker command files.

If you go to 'Tools->Memory Map', you can see the memory map of the target and create a linker command file that uses the available memory on the target.

Hope this helps,

0 Ki over 15 years ago in reply to Ki

TI__Guru**** 478801 points

Ki-Soo Lee said:
See: http://focus.ti.com/lit/ug/spru280h/spru280h.pdf for more information on linker command files.

Forget to mention that the section of interest is section 8.6

0 Frederico over 15 years ago in reply to Ki

Intellectual 405 points

Hi,

But, is there some default command linker file for TMS320VC5507 or I have to create one?

Thanks!

0 Ki over 15 years ago in reply to Frederico

TI__Guru**** 478801 points

Did your board come with any software examples? I would imagine that it would be included with some examples.

0 Frederico over 15 years ago in reply to Ki

Intellectual 405 points

No, My board didn´t come with code examples. But, I found one C5515 cmd file that works, I will modify it!

Thanks.

Code Composer Studio™︎

Code Composer Studio forum

C55xx_0: File Loader: Data verification failed at address 0x00FFFF00 Please verify target memory and memory map.