CCS/msp430f2471: MSP430F2471

Kumar B

Prodigy 170 points

Part Number: MSP430F2471

Tool/software: Code Composer Studio

Hi,

I just want to read the register contents using the MSP430 FET debugger. How to do that?

Can anyone help me?

Regards,

Swaroop

over 6 years ago

0 AartiG over 6 years ago

TI__Guru**** 173310 points

Swaroop,

I'm not sure if I understood your question correctly. Are you looking to read a register value from your C program or looking to view registers in CCS? If it is the former, I would suggest asking the question in the MSP430 device forum as the experts there can help best with that. If it is the latter, you should be able to open the Registers view in CCS when debugging your program.

Let me know if this is not what you were asking about.

0 Kumar B over 6 years ago in reply to AartiG

Prodigy 170 points

I want to know the status of register values in debug mode in the C program

0 AartiG over 6 years ago in reply to Kumar B

TI__Guru**** 173310 points

Ok, so you want to programmatically access/read the register values. I'm not sure if this is possible, but I would suggest starting a new post in the MSP430 forum so the experts there can comment.

Code Composer Studio™︎

Code Composer Studio forum

CCS/msp430f2471: MSP430F2471