CCS/MSP-EXP430FR4133: CCS/MSP-EXP430FR4133

David Pinchas

Part Number: MSP-EXP430FR4133
Other Parts Discussed in Thread: MSP430G2553,

Tool/software: Code Composer Studio

try to connect ccs 8.0 to msp-exp430fr4133 board but fail. the same when connect to msp-exp430g2 with msp430g2553 (driver install correct). with IAR the connection ok.

did not any solution please help.

david

answer to david-p51@013.net.il

over 5 years ago

0 Tomasz Kocon over 5 years ago

Guru 26200 points

Hello David,
try to rerun CCS installer and select debug probes you plan to use.

0 JohnS over 5 years ago

TI__Guru**** 159715 points

David,

What error message do you get? I assume this is on Windows?

Regards,
John

0 JohnS over 5 years ago in reply to JohnS

TI__Guru**** 159715 points

David,

As we have not heard back from you I am going to assume that you were able to get past this.

Regards,
John

0 David Pinchas over 5 years ago in reply to JohnS

Prodigy 150 points

no i did not solve this problem. it no connect to evluation msp430 board. no com connecting found. with iar system it work ok

0 JohnS over 5 years ago in reply to David Pinchas

TI__Guru**** 159715 points

Is "no com connecting found" the error you are seeing?

If I try to launch a debug session in Code Composer Studio and it has trouble connecting to a MSP430 target this is what the error message is that I see:

Is that what you are seeing?

Regards,

John

Code Composer Studio™︎

Code Composer Studio forum

CCS/MSP-EXP430FR4133: CCS/MSP-EXP430FR4133