CCS/MSP-EXP430G2: CCS/MSP-EXP430G2

Mithilesh Kumar

Part Number: MSP-EXP430G2

Tool/software: Code Composer Studio

Whether MSP-EXP430G2 LaunchPad (includes a pre-programmed MSP430G2553 device) compatible with CCS version 6.1.2 which includes Grace 3.10 & it will support MSP430G2231 also for CCS version 6.1.2 which includes Grace 3.10? At present in quick start guide it is stated that it supports CCS version 4 for both MCUs MSP430G2553 & MSP430G2231 (and it is working).

over 4 years ago

0 Tomasz Kocon over 4 years ago

Guru 26200 points

Assuming that MSP430G2231 is electrically compatible with MSP-EXP430G2
just try create an empty MSP430G2231 project under CCS v6.1.2.

0 JohnS over 4 years ago

TI__Guru**** 159715 points

Mithilesh,

MSP430G2231 should be supported by CCSv6.1.2. As Tomasz mentioned you can try to create an empty project to confirm this. If it does not show up I would run a check for updates and install the latest MSP430 updates.

Note that I would not recommend using Grace. The tool has not been updated in many years and is not currently supported.

Regards,
John

0 Mithilesh Kumar over 4 years ago in reply to JohnS

Prodigy 90 points

Resolved.

Code Composer Studio™︎

Code Composer Studio forum

CCS/MSP-EXP430G2: CCS/MSP-EXP430G2