CCS/TMS320C5515: TMS320C5515

Hans Morsh

Part Number: TMS320C5515

Tool/software: Code Composer Studio

Hi There,

I got TMS320C5515 (eZdsp) board and trying to debug a program , giving me the error no 2083 "unable to communicate with debug probe..."

but during the configuration, the debug probe selected and verified and everything look fine, when I try to run simple program giving me this error.

I chose the Xds100v2 as debug probe and verified fine.

Thanks,

over 4 years ago

0 desouza over 4 years ago

TI__Guru**** 168337 points

Hi,

Additional details about the error can be found at the debugging JTAG page below (just search for the error number)

https://software-dl.ti.com/ccs/esd/documents/ccs_debugging_jtag_connectivity_issues.html

However, error 2083 is specifically applied to another class of Debug Probes (XDS200, XDS560 or XDS560v2), which leads me to believe a misconfiguration is taking place.

Can you try to manually launch the target configuration and see if it makes any difference? The reason is that sometimes when there are multiple projects and/or a default or active target configuration, it may be launched instead of the desired one.

Details about creating and manually launching the target configuration can be found at sections 7.2 and 7.3 of the CCS User's Guide at:

https://software-dl.ti.com/ccs/esd/documents/users_guide/index.html

Hope this helps,

Rafael

Code Composer Studio™︎

Code Composer Studio forum

CCS/TMS320C5515: TMS320C5515