RTDX- C6713

BAS

Other Parts Discussed in Thread: ADS7881

Hi,

I am using ADS7881 to sample analog signal using C6713 DSK. How can I use RTDX to save digital samples to PC ? Actyally my target is to draw statistics based on many data points ?

What other options are availabe to transfer sampled values to a file ?

Thanks.

over 14 years ago

0 BAS over 14 years ago

Expert 2370 points

Will some body reply me here ?

0 Ki over 14 years ago

TI__Guru**** 442641 points

RTDX is no longer supported so I cannot recommend an RTDX based solution. Unfortunately there is not a good alternative to a similar real-time host<->target communication for data transfer in the CCS environment. People have made custom solutions such as sending data to another transport (like UART ot Ethernet). Sorry.

0 Tariq Siddiqui over 14 years ago in reply to Ki

Expert 2270 points

What other option do I have to transfer data to a file from C6713 DSK ?

My objective is to save let say 50K points and use them to draw the statistics in Matlab.

Please help.

0 David Waldo over 13 years ago in reply to Ki

Prodigy 20 points

Wow! This is really disconcerting. I have to find that CCS v4 doesn't support a long time feature in a forum post. I have been using RTDX with CCS 2.x and 3.x and have built many of the things I do in my courses around the RTDX host - target interface. Now I find there is nothing I can do as an alternative. There has to be some type of alternative. Any help would be appreciated.

David

0 Tariq Siddiqui over 13 years ago in reply to David Waldo

Expert 2270 points

Hi David,

Can you please tell me how can I use RTDX to transfer large amount of data from DSP to Matlab ?

I will appreciate your help.

-Tariq

0 David Waldo over 13 years ago in reply to Tariq Siddiqui

Prodigy 20 points

I don't use MATLAB very much for this. You should look at this to start with.

http://cnx.org/content/m14388/latest/

David

Code Composer Studio™︎

Code Composer Studio forum

RTDX- C6713