CCS/LAUNCHXL-TMS57004: CCS/LAUNCHXL-TMS57004: XDS100 Driver

N King

Tool/software: Code Composer Studio

Hi, on Mar 27, 2020 12:09 PM, I enquired as to how to get the devboard recognised by my Windows 7 PC. You suggested I check the screenshots in section 2.6 of https://processors.wiki.ti.com/index.php/XDS100 .

I could see that I didn't have the debug port listed, and that document told me how to re-load the drivers.

I have a repeat of the same issue, albeit on a second board. The board works on a Windows 10 installation. Checking the XDS document linked above, although it still shows the control panel screens as they should be, I can find no content under the section about re-loading drivers. Has it been removed? Is there anywhere else I can find what to do? My control panel:

Thanks

over 3 years ago

0 Ki over 3 years ago

TI__Guru**** 420760 points

Hello,

N King said:
I can find no content under the section about re-loading drivers

I believe you are referring to the information in this post:

https://e2e.ti.com/support/tools/ccs/f/81/p/522774/1902102#1902102

Also check the below link:

https://software-dl.ti.com/ccs/esd/documents/ccs_debugging_jtag_connectivity_issues.html#generic-ftdi-failure

At the bottom of the section, there is a paragraph about force updating of the FTDI drivers. This can help too

Thanks

0 N King over 3 years ago in reply to Ki

Intellectual 460 points

OK. Although you point to a document regarding FAQs and help, this is now a PDF with no links.

I thought I might as well rip out all the relevant drivers, and after the third attempt, got a different view on the device manager where it just shows channel A and B.

CCS can now talk to it.

Code Composer Studio™︎

Code Composer Studio forum

CCS/LAUNCHXL-TMS57004: CCS/LAUNCHXL-TMS57004: XDS100 Driver