Other Parts Discussed in Thread: OMAP-L138
CCS4.2.1.00004C6748 / OMAP-L138
When I open the registers window and try to look at the DMA registers I just get blank entries, both for the ARM core and the DSP core; i.e.:
Other register groups seem to function properly.
Is there some way to get the DMA registers to display properly?
Thanks,
Peter Steinberg
Thanks,
I must have missed that thread.
On a similar vein, the pulldowns for the various PINMUX registers also appear wrong.
The definitial in the "rCSL_syscfg0_001.xml" file appears correct:
<register id="PINMUX0" acronym="PINMUX0" offset="0x0120" width="32" description="Pin Mux 0 Register">
<bitfield id="PINMUX0_31_28" width="4" begin="31" end="28" resetval="0" description="PINMUX0[31:28] mux selection" range="" rwaccess="RW">
<bitenum id="Default" value="0" token="Default" description="Default" />
<bitenum id="Reserved1" value="1" token="Reserved1" description="Reserved" />
<bitenum id="ALARM" value="2" token="ALARM" description="ALARM" />
<bitenum id="UART2_CTS" value="4" token="UART2_CTS" description="UART2_CTS" />
<bitenum id="GPIO0_8" value="8" token="GPIO0_8" description="GPIO0_8" />
</bitfield>
