This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TIDA-01420
does anyone try to run the TIDA-01420 reference design?
I already made it, but unfortunatelly there is no example/training code and also in the key document for the desing TI uses some "adapter PCB" between the board and the delfino TMDSCNCD28379D board.
does anybody have an idea where i can find more info about this board?
I have the delfino board and also i have dock station for it, but there is no info( sheme) how to connect the both boards.
Anyone can help???
thank you for your interest in TIDA-01420 and even re-building that TIDA-01420 board yourself.
The adapter board was an internal board used only for testing the functionality of the power stage. The same adapter board was also used with the TI design TIDA-01455 www.ti.com/tool/tida-01455. For details on the adapter PCB like schematics, Altium CAD files, please refer to the Design Files folder of TIDA-01455. It is included in the corresponding zip files.
On firmware: For TIDA-01420 (neither TIDA-01455) we do not have ready to use C2000 firmware available. I would recommend download the C2000 Motor Control SDK at: http://www.ti.com/tool/download/C2000WARE-MOTORCONTROL-SDK and adapt a code example like "tmdxiddk379d" to the corresponding power stage, such as TIDA-01420. If you have specific questions on C2000 Motor Control SDK and related software, you can also leverage the C2000 E2E forum.
Regards, Martin Staebler
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Martin Staebler:
thanks for your quick repply. It is very helpfull and i'm going to follow your opinion.
As a last question, from the provided link i can see that the C2000Ware motor control sdk supports the F28004X devices. is it possible to use the TMDXCNCD280049M instead of TMDXIDDK379D?
Thanks in advance!
In reply to Yordan Stoyanov83:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.