This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I tried install macro model in "Infineon - PSpice - IGBT - TRENCHSTOP5 - F5.lib" at Tina-Ti 9
and simulate model "IGP40N65F5_L2" in "Infineon - PSpice - IGBT - TRENCHSTOP5 - F5.lib".
Import Pspice net and compile --------- no error
New Macro Wizard --------- Access violation at address 009B6769 in module tina.exe
I will take a look at the model.
Online Design Tools
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Britt Brooks - Online Design Tools:
Please try the attached .TSM file. It can be used with the Insert--> Macro feature in TINA-TI.
Hello Britt,I insert "IGP40N65F5_L2.TSM" in Macrolib.I exchange to this macro and simulate.Then TINA-TI is stopped.
Next I edit new circuit diagram and simulate.TINA-TI is stopped,too.
Best regards, Kechan
In reply to KECHAN:
Could you provide the .TSC file you are using?
I insert "IGBT_IGP40N65F5_Infenion.TSC".
Sorry for the delay. If you set the DC absoulte current limit to 100n and change the Always start Source step to Yes:
The simulation should run correctly.
I change analisys parameter and simulate.
TINA-TI is stopped (Humg up) in same way.
I insert changed file "IGBT_IGP40N65F5_Infenion.TSC".
The .TSC file you provided worked well with Transient and DC analysis. Please check your version of TINA-TI. The latest version on the web is 126.96.36.199. If you do not see this version when you click on Help--> About from the TINA-Ti window, download the .zip file from the web and update your version of TINA-TI.
I am using the latest version of TINA-TI. It does take a few seconds to start on my machine.
I check TINA-TI JAPANESE I use , this latest Version is 188.8.131.52.
I install TINA-TI English Version 184.108.40.206.
I simulate correctly by TINA-TI English Version.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.